This official USB-C power supply from the Raspberry Pi Foundation is specially made for the Raspberry Pi 4 (B).
This power supply has a fixed EU plug.Specifications:

∙ Input voltage: 96 - 264V AC
∙ Voltage: 5.1V DC
∙…

Official microUSB Power Supply Unit for Raspberry Pi 3 Model BThis Pi Foundation approved power supply unit (PSU) for the Pi 3, is available at RS in both black (9098135) and white (9098126) colours. The power supply is an…

Official microUSB Power Supply Unit for Raspberry Pi 3 Model BThis Pi Foundation approved power supply unit (PSU) for the Pi 3, is available at RS in both black (9098135) and white (9098126) colours. The power supply is an…

PowerBoost 1000C is the perfect power supply for your portable project! With a built-in load-sharing battery charger circuit, you'll be able to keep your power-hungry project running even while recharging the battery! This little…

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 2500mAh for a total of about 10 Wh. If you…

This 5,3V 2A multi voltage charger is perfectly suited for use with the Raspberry Pi. Tested on multiple Pi`s under different loads and conditions, this quality charger delivers a stable voltage to the Pi of 4.85 to 5.05V, which…

PowerBoost 1000C is the perfect power supply for your portable project! With a built-in load-sharing battery charger circuit, you'll be able to keep your power-hungry project running even while recharging the battery! This little…

This is a beefy switching supply, for when you need a lot of power! It can supply 5V DC up to 10 Amps, running from 110V or 220V power (the plug it comes with is for US/Canada/Japan but you can use any plug adapter for your…

This is a beefy switching supply, for when you need a lot of power! It can supply 12V DC up to 5 Amps, running from 110V or 220V power (the plug it comes with is for US/Canada/Japan but you can use any plug adapter for your…

PowerBoost is the perfect power supply for your power-hungry portable project! This little DC/DC boost converter module can run from 1.8V batteries or higher, and convert that voltage to 5.2V DC for running your 5V projects. With…

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 1200mAh for a total of about 4.5 Wh. If you…

So adorable, this is the tiniest little lipo charger, so handy you can keep it any project box! Its also easy to use. Simply plug in the gold plated contacts into any USB port and a 3.7V/4.2V lithium polymer or lithium ion…

PowerBoost 500C is the perfect power supply for your portable project! With a built-in battery charger circuit, you'll be able to keep your project running even while recharging the battery! This little DC/DC boost converter…

Need a massive battery for your project? This lithium ion pack is made of 3 balanced 2200mAh cells for a total of 6600mA capacity! The cells are connected in parallel and spot-welded to a protection circuit that provides…

The first UPS for your Raspberry Pi.

The UPS comes with a battery holder for 6 AA. (Batteries not included)

FAQ:How do I connect the Pi UPS?The supply of power for the device is connected to a micro-USB port on the Pi UPS. The…

Power Bank from ModMyPi is a powerful portable solution for keeping your Raspberry Pi powered anywhere! Boasting a massive 8000mAh power capacity and 5.25V 1A output, this portable charger has enough juice to keep your Raspberry…

Add a power switch to any USB-powered project simply by plugging this between the USB power port and the USB cable. This is the most useful thing you never knew you needed! You'll want to pick up a bunch for your electronic…

Add a power switch to any project simply by plugging this between the power supply. This is the most useful thing you never knew you needed! You'll want to pick up a bunch for your electronic projects.

Comes with a 5.5/2.1mm…

NOTE: This product is only designed for use with solar panels from Adafruit. We cannot guarantee this will work with solar panels purchased elsewhere. Please purchase this kit and panels from Adafruit to ensure optimized…

This is a Lithium Ion and Lithium Polymer battery charger based on the MCP73833. It uses a USB mini-B for connection to any computer or `USB wall adapter`. Charging is performed in three stages: first a preconditioning charge,…

This panel is a 12-cell (6V) assembly mounted onto a fiberglass PCB and covered with PET plastic which protects the cells without reducing efficiency. The back has two soldering spots to easily connect and is conformal coated. The…

Tired of low quality chargers that last for two weeks before exploding, and don`t even power your Raspberry Pi properly? You need ModMyPi`s HQ 5V 2A detachable USB mains charger which has been specifically developed by us for use…

This 5V 1500mA multi voltage charger is perfectly suited for use with the Raspberry Pi. Tested on multiple Pi`s under different loads and conditions, this quality charger delivers a stable voltage to the Pi of 4.85 to 5.05V, which…

This mobile power adapter is ideal for the traveling Pi User.
You can charge you mobile phone or keep your Pi running in most countries.
The Adapter can be used in: UK/USA/EU and AustraliaAnd has a seperate USB->MicroUSB…